Information: Amazon Kindle Fire X (1st Gen) ("otterx")
| |
| Codename: | otterx |
|---|---|
| Vendor: | Amazon |
| Release date: | 2011 September 28 |
| Type: | tablet |
| Platform: | TI OMAP4430 |
| CPU: | 1 GHz dual-core Cortex A9 |
| GPU: | PowerVR SGX540 |
| RAM: | 512MB |
| Weight: | 413 g (14.6 oz) |
| Dimensions: | 190 mm (7.5 in) (h) 120 mm (4.7 in) (w) 11.4 mm (0.45 in) (d) |
| Screen size: | 178 mm (7.0 in) |
| Resolution: | 600×1024 |
| Screen density: | 160 ppi |
| Screen type: | IPS LCD |
| Internal storage: | 8GB |
| SD Card: | none |
| Wi-Fi: | 802.11 a/b/g/n |
| Power: | 4400 mAh (6-7 hours of use) |
| CM supported: | 11 |
Get CyanogenMod for the Kindle Fire X (1st Gen)
Development channel a.k.a. Nightlies, usually generated every 24 hours, experimental, newest features, unstable! Release channel a.k.a. Milestones or Snapshots, all or nearly all issues resolved, stable for daily use
Installation
How to install CyanogenMod on the Kindle Fire X (1st Gen)
Or build CyanogenMod yourself
Build guide
How to build CyanogenMod for the Kindle Fire X (1st Gen)
- Also, learn more about building CyanogenMod in general.
Source code
| Device | http://www.github.com/cyanogenmod/android_device_amazon_otterx |
| Kernel | http://www.github.com/cyanogenmod/android_kernel_amazon_otter-common |
Additional resources
Special boot modes
- Recovery: During bootloader splash screen (typically a gray Kindle logo), press Power to open the boot menu, and then press Power again (as a short press) to move to the Recovery Boot menu item. Then, LONG press the Power button to make this selection.
- Fastboot: Use fastboot cable or pre-enter fastboot command during bootloader to enter fastboot mode.
Known Issues
To see a list of known issues, or to submit an issue, visit the Known Issues page for the Kindle Fire X (1st Gen).
Find help online
You may find assistance with the Kindle Fire X (1st Gen) on Internet Relay Chat or on the CyanogenMod forums.
Maintainers
The following people are maintainers for this device: Hashcode
Edit the otterx device template
This wiki has a "master" device template for adjusting settings pertaining specifically to the Kindle Fire X (1st Gen) (learn more). To change these master settings, edit the wiki device template at Template:device_otterx.
Helpful Tip
